Quality control of installation at the site
Fate attenzione: l’architrave orizzontale è sullo stesso livello delle travi sovrapposte della finestra (non si noteranno con la finestra chiusa).
You have opened the window. The fresh air comes in, but so do flies, mosquitoes, down and dust. You don’t like it, do you? Then our product has been designed for you!
Anti mosquito curtain systems fit all types of windows: old and new, big and small, wooden and aluminium, with double glass pane and without it. They can be easily installed into balcony doors, attics and terraces.
Anti mosquito nets are invisible, simple and reliable, comfortable and lasting. Anti mosquito net is located in the small aluminum box and so is defended from bad weather. Side guides put the net in motion. The brushes that are installed into the board end and side guides secure effective insulation. The special profile of the board end makes it possible to pull out and fix the anti mosquito net.
Anti-mosquito curtain net (white). Assembly set for anti-mosquito roller net (brown).
Scheme of assembling of frame anti-mosquito net: Steps of assembling:
1. Short holders are fixed on the window casing closely to the end cover of WPP (waterproof profile). The bearing part of the short holder is fixed 1mm lower than the end cover of WPP.
2. Long holders are fixed on the top of the window casing. Interval from point “A” to the bearing part of the long holder should be 3mm bigger than the height of the net itself.Attention! The holes drilled in the window casing should be worked up with hermetic before the screws are put. Roller net. Installation: Assembling set:
1. Box with the net width 45 mm height 57mm.
2. Side guides width 40 mm thickness 22 mm.
3. The bearing corner 20-30 mm width 2 mm.
4. The bearing holder for fixing onto the window casing.
5. Lock holder.
6. Gags on the side guides (brown and white).
7. Lace with lock and handle.
8. Screws for fastening of the net casing and side guides to the window casing.Steps of installation:
1. The bearing holders are installed from above to the casing along the side guides and are fixed by lock screws.2. The bearing corner is installed above the waterproof profile.
3. In the side guides the holes three millimeters in diameter are drilled. The center of the hole is situated 15 mm from the outer end of the side guide. The first hole is situated 50 mm. from the bottom part of the side guide, the second – 100 mm. from the first and so on.
The face and the back sides are drilled at once.4. From the face side the holes 8.7 millimeters in diameter are drilled. At the back side the hole is countersinked to match the screw-head. 5. Lock holders are inserted into the side guides. L - into the left one, R – into the right.
6. The side guides are joined to the casing of the net.
7. The whole construction is installed on the bearing corner. The side guides are installed parallel to the window casing. The net casing is fastened to the window casing, the side guides – to the window casing as well. Gags are inserted into the side guides.
8. Attention! The holes drilled in the window casing should be worked up with silicone hermetic.
9. The handle is fastened to the lace, the lace is fastened to the net. The net movement is tested.
Roller mosquito net. Vertical opening.
Roller mosquito net. Horizontal opening.
Maximum dimensions:
Frames of white or brown colour, mosquito net of grey colour.
